矿山工程建设项目造价管理信息系统设计

为提高矿山工程建设项目造价管理水平,设计了矿山工程建设项目造价管理系统。通过分析矿山工程项目的造价组成,并采用三层B/S架构设计系统硬件框架,运用Web服务器传输矿山工程项目各项数据,划分系统功能子系统,并对矿山工程建设项目造价额与价差预备费进行计算,完成系统软件设计。结果表明,该系统能够有效管理矿山工程建设项目造价,并对外部的恶意攻击进行及时报警,系统具有有效性与安全性。     

建筑工程招投标中控制工程造价的策略探讨

做好建筑工程项目招投标阶段的工程造价管理,可以更好保证施工企业利益。本文对建筑工程项目招投标阶段工程造价的影响因素进行分析,并提出相应的控制策略。     

基于战略成本管理分析的电镀废水清洁生产新技术——冰冻法

运用战略成本管理分析工具中的广义成本分析、无效成本分析和价值链分析,对典型滚镀镍工艺的成本进行研究。认为电镀废水处理技术应以大幅降低电镀液损耗和水费为重点。提出一种能够满足清洁生产要求的电镀废水处理新技术──冰冻法。以酸铜电镀工艺为例的初步试验和经济技术分析显示,冰冻法易于实现镀件带出液的再回收利用,有良好的经济效益,适用于各种电镀工艺的废水处理。     

高硬度环保耐蚀柴油机气缸套的研制

在缸套表面进行镍磷复合镀强化处理,可以提高湿式内燃机缸套耐腐蚀性能,但会增加产品的成本。研究了在普通贝氏体气缸套材料基础上去掉贵重金属镍,调整其他成分比例,在确保材料性能不变的前提下,降低产品的成本。结果表明,配合表面强化处理,缸套硬度高、耐腐蚀强、生产成本低,并可以延长发动机寿命。     

热轧双相钢生产现状、存在问题及发展趋势浅析

介绍了国内外热轧双相钢的发展现状；对热轧双相钢的成分体系和关键生产工艺进行了总结，指出了目前热轧双相钢在生产过程中存在的问题；提出了未来热轧双相钢的主要发展方向为低成本、高强度、低负荷、高表面质量和“以热代冷”。     

我国建筑石料用灰岩采矿权成交价变化分析

砂石资源采矿权出让收益是地方财政收入的重要来源。近年来,砂石资源供应紧张价格大幅上涨的背景下,本文以典型的砂石资源建筑石料用灰岩为例,分析了全国及部分典型省份建筑石料用灰岩采矿权成交价的变化特征,主要结论是2011～2018年我国建筑石料用灰岩采矿权平均成交单价与砂石市场供应价格均呈上升趋势但前者涨幅远高于后者,并且采矿权成交单价的区间分布结构年度变化差异也较大,不同区域平均成交单价年度变化规律分异明显,贵州、甘肃两省采矿权成交单价相对较低且变化幅度相对较小,山西、吉林、湖北、广西4省采矿权成交单价相对较高且变化幅度相对较大。最后,从平抑砂石价格过快上涨、加强矿业权市场建设、促进砂石资源区域供需平衡、维护良好砂石市场价格秩序的角度提出了有关政策建议。     

两个大型住宅项目设计配套消防备供电源供电方案分析及优劣对比

通过对两个大型住宅项目配置消防备供电源供电方案进行对比,分析由此产生的建设安装造价成本高低,以及后期物业管理程序的难易程度,总结出适宜于大型住宅项目的消防备供电源供电方案,既能降低建设投资成本,又可以简化后期物业管理程序,更好地保障消防系统供电安全,值得推广。     

Time-frequency domain causality of prime building cost and macroeconomic indicators in Ghana: implications for project selection

According to the Ghana Statistical Service, construction activity generated US$3.8 billion in 2014, representing about 12.7% of nominal GDP. A key factor that most investors in the construction sector consider in project selection is cost which has escalated over the years. Therefore, we examine the co-movements and causality in the time and frequency domains between the prime building cost index (PBCI) and its disaggregates on one hand and inflation and exchange rate on the other hand in Ghana. The findings revealed that the degree of co-movement between PBCI and inflation was significant at the 5% level and occurred over the long-run, indicating that construction cost drives inflation. The degree of co-movement between the prime build cost index and exchange rate occurred within the short term. These co-movements have policy implications for substituting inflation and exchange rates in project costing by investors in Ghana. The co-movement between the PBCI and inflation in the medium to higher frequencies suggests that inflation risk-averse investors should consider short-term projects. Again, the short to medium frequency co-movements between the PBCI and exchange rate indicates that investors should consider exchange rate risk in long-term projects.     

Optimal cost design of flow lines with reconfigurable machines for batch production

Modular reconfigurable machines offer the possibility to efficiently produce a family of different parts. This paper formalises a cost optimisation problem for flow lines equipped with reconfigurable machines which carry turrets, machining modules and single spindles. The proposed models take into account constraints related to: (i) design of machining modules, turrets, and machines, (ii) part locations, and (iii) precedence relations among operations. The goal is to minimise equipment cost while reaching a given output and satisfying all the constraints. A mixed integer programming model is developed for the considered optimisation problem. The approach is validated through an industrial case study and extensive numerical experiments.